If you want to decorate a garment, accessory, luggage piece or perhaps hats you can actually sew on badges to have the fresh look easily. Badges or patches when placed strategically can immediately replace the look of a garment or accessory and take it from boring to spunky in a matter of minutes. If you have children and they keep earning badges of merit you wish to sew them on. However, as intimidating as it might sound, sewing on badges isn’t very difficult when you know the way to do it.
To start this approach to sewing on a badge, start by placing the badge over the place in which you want it to be. Now secure the badge well with a few pins to ensure that it stays in place and doesn’t shift while you’re sewing it on. So if you happen to be putting the patch over a garment, you ought to fix the patch after which try the garment on to be sure that the patch or the badge looks best suited in the place. In case your patch needs a little readjustment you can accomplish it at this stage easily.
Now thread the needle making sure that the thread that you are currently using isn’t too long. Keep the thread on a length of approximately 18inches for simple maneuvering. If the thread is way too long then you might get bothered by knots. Once you’ve the thread ready make a knot at the end of the thread. You can actually thread a needle manually by holding the non knotted end between your forefinger and thumb after which passing it via the eye of your needle. It’s also possible to consider the aid of a needle threader if you find threading a needle in such a manner difficult.
Pass the needle in the badge and the fabric ensuring that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from which you began stitching keeping this distance from your last stitch at all times. Continue stitching around the entire perimeter of the badge till you have completed stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread using a single stitch. Pull the thread strongly to secure the knot and after that cut-off any excess thread that is left. Lastly remove the extra safety pins that you were using to secure the patch in place.
It’s also possible to sew on badges with the help of a sewing machine if you don’t want to do the same yourself. Pick a thread that matched the colour of your patch and then tread your machine. You may as well decide on a contrasting color with regards to the look which you want to give your badge. Once this is accomplished you ought to start sewing you badge. Utilize the surface of the badge as your starting point and sew all along the edge of your badge using the regular stitch mode ending in your start line. Once done, cut the excess thread that connects the badge to the machine and your garment is ready to be used with the badge.